6222 ZZ Deep Groove Ball  Bearing 110*200*38mm SUNBEARING

6222 ZZ Deep Groove Ball Bearing 110*200*38mm SUNBEARING 6222 bearing Bore diameter: 110 mm Limiting speed 3400 r/min Outside diameter: 200 mm Reference speed 6700 r/min Overall width: 38 mm Calculation factor (Kr) 0.025 Rows of Balls Single Calculation factor (f0) 14.3 Outer ring type: Unsplit Row Type & Fill Slot Single Row Non-Fill Slot Internal clearance: CN(Standard) Snap Ring Included Without Snap Ring Closure type: ZZ Weight: 4.59 kgs Basic dynamic load rating, radial 151 kN da min 122 mm Basic static load rating, radial 118 kN Da max 137.9 mm Fatigue limit load, radial 4 kN ra max 2 mm 6222 ZZ Bearing Short Description The character of 6222 bearing is low frictional resistance and high speed. And can bear the radial load or the combined load of the radial and axial simultaneous action on the machine. Deep groove ball bearings mainly bear radial load, and can also bear radial load and axial load at the same time. When it only bears the radial load, the contact angle is zero. When the deep groove ball bearing has a large radial clearance, it has the performance of an angular contact bearing and can bear a large axial load. The friction coefficient of the deep groove ball bearing is very small, and the limit speed is also very high. 6222 Ball Bearing Features After the deep groove ball bearing is mounted on the shaft, the axial displacement of the shaft or the housing can be limited within the axial clearance range of the bearing, so it can be axially positioned in both directions. In addition, this type of bearing also has a certain degree of self-aligning ability. It can still work normally when it is inclined by 2′ to 10′ relative to the housing hole, but it has a certain impact on the bearing life. 6222 Bearing Application Small power motors, automobile, and tractor gearboxes, machine tool gearboxes, general machines, tools, etc. Deep groove ball bearings can be used in gearboxes, instruments, motors, household appliances.